News

Our Featured Articles

Latest News

  • Are brushless DC motors more efficient? A practical comparison
    Brushless DC Motor

    Are brushless DC motors more efficient? A practical comparison

    Brushless DC motors can reduce brush friction, but efficiency depends on the full drive, load and duty cycle. Here is how to make a fair comparison.
    More Details
  • Hall Sensor in BLDC Motor: Signals, Commutation and Selection
    Controllers · drives · wiring and system integration

    Hall Sensor in BLDC Motor: Signals, Commutation and Selection

    Hall sensors provide rotor-position feedback that helps a BLDC controller choose when to switch motor phases. This guide explains the signal pattern, its limits, and practical checks for an OEM motor-and-drive setup.
    More Details
  • How to Select a High-Torque BLDC Motor: Torque, Speed, Current, and Thermal Limits
    BLDC Gearmotor
    Brushless DC Motor
    Continuous Torque
    High Torque BLDC Motor
    Low-Speed BLDC Motor
    Motor Selection
    Peak Torque
    Torque Constant

    How to Select a High-Torque BLDC Motor: Torque, Speed, Current, and Thermal Limits

    Learn how to select a high-torque BLDC motor using rated and peak torque, speed, current, duty cycle, thermal limits, and gearbox trade-offs.
    More Details
  • Are Brushless Motors AC or DC? The Supply and Drive Explained

    Are Brushless Motors AC or DC? The Supply and Drive Explained

    A BLDC system usually takes DC at the drive, while the controller switches current through the motor phases. This guide separates those boundaries and shows what to verify for a specific model.
    More Details
  • BLDC vs PMSM Motors: How to Choose the Right Drive System
    BLDC Motor
    FOC
    Motor Selection
    PMSM
    Six-Step

    BLDC vs PMSM Motors: How to Choose the Right Drive System

    Compare BLDC and PMSM motors by back EMF, control, torque smoothness, feedback, supply, drive cost, and application fit.
    More Details
  • BLDC Motor Pumps: Select the Motor, Drive and Hydraulic Assembly

    BLDC Motor Pumps: Select the Motor, Drive and Hydraulic Assembly

    If you are choosing one for an OEM product, start with the liquid, required flow and total head; only then choose the motor and controller. A large maximum-flow figure cannot tell you what the pump will deliver against your system resistance.
    More Details
  • How to Select a BLDC Servo Drive That Fits the Complete Axis
    Controllers · drives · wiring and system integration

    How to Select a BLDC Servo Drive That Fits the Complete Axis

    A drive that spins a brushless motor on a bench may still be unable to position the load, hold it safely, manage returned energy, or communicate with the controller. Start with the motion profile and the exact motor and feedback identifiers.
    More Details
  • How to Choose a BLDC Motor Controller: 8 Checks
    BLDC Motor Controller、 BLDC Motor Driver、 CAN Bus、 Hall Sensor、 Motor Selection

    How to Choose a BLDC Motor Controller: 8 Checks

    Choose a BLDC motor controller by matching bus voltage, continuous and peak current, feedback, interface, braking, protection, and thermal limits.
    More Details
  • How to Size a BLDC Gearmotor: Torque, Speed, Ratio, and Duty Cycle
    BLDC Gearmotor
    Duty Cycle
    Gear Ratio
    Motor Sizing
    Output Torque

    How to Size a BLDC Gearmotor: Torque, Speed, Ratio, and Duty Cycle

    Learn how to size a BLDC gearmotor from load torque and speed. Calculate gear ratio, duty cycle, gearbox limits, and driver requirements.
    More Details
  • How Does a Servo Motor Work? Components and Selection
    Encoder
    Motion Control
    Motor Sizing
    Servo Drive
    Servo Motor

    How Does a Servo Motor Work? Components and Selection

    Learn how a servo motor system uses feedback and control loops, then select torque, speed, inertia, encoder, drive, and environmental requirements.
    More Details
  • Brushed vs Brushless DC Motors for Industrial Equipment
    BLDC Motor
    Brushed DC Motor
    Brushless DC Motor
    Motor Selection

    Brushed vs Brushless DC Motors for Industrial Equipment

    Choose a brushed DC motor for simple, intermittent and serviceable equipment. Choose a BLDC system when extended duty, reduced maintenance or closed-loop control matters more.
    More Details
  • How Does a BLDC Motor Work? Commutation and Control
    BLDC Motor
    FOC
    Hall Sensor
    Sensorless BLDC
    Six-Step

    How Does a BLDC Motor Work? Commutation and Control

    Learn how a BLDC motor works, from stator and rotor construction to six-step commutation, Hall and sensorless feedback, PWM, and FOC control.
    More Details

    • Search

    Address

    Room 402, 4th Floor, Building 3, Zhuoer Chuangbo Park, Xingye North Road, Nanhai District, Foshan, Guangdong, China

    Email

    Interested in working with us?

    Follow Us

    Newsletter

      Language