TC110BLD1500-RV075 110 mm Brushless DC Worm Gearmotor, 1500 W, 36/48/310 V

Specifications

Model: TC110BLD1500-RV075

Gearhead: RV075-□ (Worm gear reducer)

Rated Voltage: 36 V / 48 V / 310 V

Rated Power / Speed: 1500 W / 2000 rpm

Share as

Request A Quote

Download PDF

Introduction

The TC110BLD1500-RV075 combines the supplied 110 mm brushless DC motor with the Worm gear reducer. The supplied catalog specifies 1500 W, a rated motor speed of 2000 rpm, rated motor torque of 7.16 N·m, and peak motor torque of 21.49 N·m. Available voltage and reduction-ratio options are listed in the tables below.

Model Dimension Drawings

Advantages

Matched drive configuration: The supplied 110 mm brushless DC motor is paired with the Worm gear reducer.

Catalog-rated performance: 1500 W at 2000 rpm, with rated motor torque of 7.16 N·m.

Peak motor torque: Up to 21.49 N·m according to the supplied catalog page.

Voltage options: 36 V / 48 V / 310 V.

Reduction-ratio selection: 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100.

Request A Quote

Continuous Rating Specifications

Model	Voltage (V)	Rated Power (W)	No-load Speed (rpm)	Rated Speed (rpm)	Rated Current (A)	Rated Torque (N.m)	Peak Torque (N.m)
TC110BLD1500-36A-20S	36	1500	2700	2000	52.08	7.16	21.49
TC110BLD1500-48A-20S	48	1500	2700	2000	39.06	7.16	21.49
TC110BLD1500-310A-20S	310	1500	2700	2000	6.05	7.16	21.49

Gearhead Options

Gearhead Type	Gearhead Model	Available Reduction Ratios
Worm gear reducer	RV075-□	7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100

Catalog note: actual output speed may be approximately 2%-20% lower than the calculated value, depending on load.