L5P-200GU-220V-20S / 5GU 3-450 RC
200 W Right-Angle Hollow-Shaft Permanent Magnet Synchronous Gearmotor, 200–240 V AC
- Model: L5P-200GU-220V-20S / 5GU 3-450 RC
- Driver Supply: Single-phase 200–240 V AC
- Rated Current: 0.70 A
- Rated Power: 200 W
- Rated Motor Torque: 1.00 N·m
- Rated Motor Speed: 2,000 r/min
- Adjustable Speed Range: 100–2,000 r/min, with or without Hall sensors
Introduction
The L5P-200GU-220V-20S / 5GU 3-450 RC combines a permanent magnet synchronous motor with a right-angle hollow-shaft gearbox. The source catalog specifies a single-phase 200–240 V AC driver supply, a rated motor speed of 2,000 r/min, and an adjustable speed range of 100–2,000 r/min for configurations with or without Hall sensors. The published gearbox ratios, output speeds and output-torque values are reproduced in the technical data table below.
Model Designation
The motor code follows the catalog legend: P identifies a permanent magnet synchronous motor; the numeric power code is in watts; 220V identifies the 200–240 V single-phase voltage class; and 20S identifies a rated speed of 2,000 r/min. The gearbox code identifies the gearbox frame, shaft form, reduction ratio and mounting structure. The catalog lists Hall-sensor (H), sensorless (W) and encoder (B) control-mode suffixes.
Key Advantages
- Compact configuration with high torque.
- Constant-torque operation and high efficiency.
- Low temperature rise and low noise.
- Wide frequency-adjustment range and straightforward installation.
- The catalog states an approximate gearbox efficiency of 85%; actual results are affected by the oil seal, gear structure, lubricant and application conditions.
Model Dimension Drawing
Technical Data
Motor Specifications
| Motor Model | Voltage | Current (A) | Power (W) | Rated Torque (N·m) | Rated Speed (r/min) |
|---|---|---|---|---|---|
| L5P-200GU-220V-20S | 200–240 V AC | 0.70 | 200 | 1.00 | 2000 |
Gearbox Performance
Gearbox Configuration: 5GU 3-450 RC; Right-angle hollow-shaft gearbox.
| Gear Ratio | 3 | 5 | 7.5 | 9 | 15 | 22.5 | 30 | 45 | 60 | 75 | 90 | 120 | 180 | 300 | 450 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Output Speed (r/min) | 667 | 400 | 267 | 222 | 133 | 89 | 67 | 44 | 33 | 27 | 22 | 17 | 11 | 7 | 4.4 |
| Output Torque (N·m) | 3 | 5 | 7.5 | 9 | 15 | 22.5 | 30 | 45 | 50 | 50 | 50 | 50 | 50 | 50 | 50 |
