TC110BLD1000-RV063 110 mm Brushless DC Worm Gearmotor, 1000 W, 24/36/48/310 V

Specifications

Model: TC110BLD1000-RV063

Gearhead: RV063-□ (Worm gear reducer)

Rated Voltage: 24 V / 36 V / 48 V / 310 V

Rated Power / Speed: 1000 W / 2000 rpm

Share as

Request A Quote

Download PDF

Introduction

The TC110BLD1000-RV063 combines the supplied 110 mm brushless DC motor with the Worm gear reducer. The supplied catalog specifies 1000 W, a rated motor speed of 2000 rpm, rated motor torque of 4.78 N·m, and peak motor torque of 14.33 N·m. Available voltage and reduction-ratio options are listed in the tables below.

Model Dimension Drawings

Advantages

Matched drive configuration: The supplied 110 mm brushless DC motor is paired with the Worm gear reducer.

Catalog-rated performance: 1000 W at 2000 rpm, with rated motor torque of 4.78 N·m.

Peak motor torque: Up to 14.33 N·m according to the supplied catalog page.

Voltage options: 24 V / 36 V / 48 V / 310 V.

Reduction-ratio selection: 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100.

Request A Quote

Continuous Rating Specifications

Model	Voltage (V)	Rated Power (W)	No-load Speed (rpm)	Rated Speed (rpm)	Rated Current (A)	Rated Torque (N.m)	Peak Torque (N.m)
TC110BLD1000-24A-20S	24	1000	2700	2000	52.08	4.78	14.33
TC110BLD1000-36A-20S	36	1000	2700	2000	34.72	4.78	14.33
TC110BLD1000-48A-20S	48	1000	2700	2000	26.04	4.78	14.33
TC110BLD1000-310A-20S	310	1000	2700	2000	4.03	4.78	14.33

Gearhead Options

Gearhead Type	Gearhead Model	Available Reduction Ratios
Worm gear reducer	RV063-□	7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100

Catalog note: actual output speed may be approximately 2%-20% lower than the calculated value, depending on load.