TC5BLD450-RV040 86 mm Brushless DC Worm Gearmotor, 450 W, 12/24/36/48/310 V

Specifications

Model: TC5BLD450-RV040

Gearhead: RV040-□ (Worm gear reducer)

Rated Voltage: 12 V / 24 V / 36 V / 48 V / 310 V

Rated Power / Speed: 450 W / 2000 rpm

Share as

Request A Quote

Download PDF

Introduction

The TC5BLD450-RV040 combines the supplied 86 mm brushless DC motor with the Worm gear reducer. The supplied catalog specifies 450 W, a rated motor speed of 2000 rpm, rated motor torque of 2.15 N·m, and peak motor torque of 6.45 N·m. Available voltage and reduction-ratio options are listed in the tables below.

Model Dimension Drawings

Advantages

Matched drive configuration: The supplied 86 mm brushless DC motor is paired with the Worm gear reducer.

Catalog-rated performance: 450 W at 2000 rpm, with rated motor torque of 2.15 N·m.

Peak motor torque: Up to 6.45 N·m according to the supplied catalog page.

Voltage options: 12 V / 24 V / 36 V / 48 V / 310 V.

Reduction-ratio selection: 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100.

Request A Quote

Continuous Rating Specifications

Model	Voltage (V)	Rated Power (W)	No-load Speed (rpm)	Rated Speed (rpm)	Rated Current (A)	Rated Torque (N.m)	Peak Torque (N.m)
TC5BLD450-12A-20S	12	450	2700	2000	46.88	2.15	6.45
TC5BLD450-24A-20S	24	450	2700	2000	23.44	2.15	6.45
TC5BLD450-36A-20S	36	450	2700	2000	15.63	2.15	6.45
TC5BLD450-48A-20S	48	450	2700	2000	11.72	2.15	6.45
TC5BLD450-310A-20S	310	450	2600	2000	1.81	2.15	6.45

Gearhead Options

Gearhead Type	Gearhead Model	Available Reduction Ratios
Worm gear reducer	RV040-□	7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100

Catalog note: actual output speed may be approximately 2%-20% lower than the calculated value, depending on load.